Commercial and Industrial Building Products



U-Panel is a "Utility" panel known for its economical through-fastened design preferred for light commercial and industrial roof or wall applications. U-Panel is especially suitable as an interior partition or liner panel for mini-storages.

Product Specifications 

  • Can be installed on pitches as low as 3:12

Features / Benefits 

  • Structural spanning allows panel to be installed over solid substrates or spaced support members.
  • Full-bearing sidelap rib provides consistent weather-resistant joint.
  • Manufactured with high tensile steel for greater load capability.
  • Matching trim packages are available in the same gauge and color as the roof panel.
  • Can be installed on pitches as low as 3:12.
  • Panel assemblies are Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC.   Panel assemblies are also Class A Fire Rated per UL790 when installed in accordance to UL listings.  Refer to UL Listings & Specifications for information.
  • 22 & 24 gauge can be crimp curved to accommodate radiused applications.
  • Matching trim packages are readily available.
  • 26 gauge U-Panel available in a wide variety of standard cool colors with the DuraTech nt coating system.
  • 22 & 24 gauge U-Panel is offered in ZINCALUME® or Galvalume® Plus for unpainted applications as well as Cool Surf White in the DuraTech nt coating system.
  • 29 gauge U-Panel is offered in the corrosion resistant ZINCALUME® Plus for unpainted applications.
  • Manufactured in Fontana, CA.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to
    as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a
    defect, and therefore is not a cause for panel rejection.

Colors and Warranties