Page 12 - BR100 Product Selection Guide

HR-36 ®

USE BOTH VERTICALLY OR HORIZONTALLY FOR A STUNNING EFFECT

HR-36 is an exposed fastener metal panel with full 36" coverage
used predominantly in industrial roof and wall applications. The
lighter gauge products are also popular in agricultural applications. 7 ⁄16"
3
Reverse HR-36 is for use in a wall application only. 1 ⁄2"
1
36" Coverage
n 36" coverage roof and wall panel.
HR-36
n Minimum recommended slope 1:12.
n Reversed HR-36 available for wall applications only.
n Gauges: 22ga, 24ga and 26ga in standard finishes and
20ga available in ZINCALUME Plus.
®
(Refer to AEP Span Color Charts for full range of color options,
prints, textures, finishes and paint systems).
n Custom manufactured sheet lengths: 6'-0" to 50'-0".
n Crimp curving available for a unique appearance.
n Matching fiberglass panels available for HR-36 HR-36 (Roof and Wall)
(Not available for Reversed HR-36).
n Testing: ASTM E283 (air infiltration) and ASTM E331 (water infiltration).
n Panel assemblies are Class A Fire Rated when installed on non-
combustible deck or framing per IBC or IRC or when installed in
accordance to UL listings per UL790. HR-36 also UL263 rated for walls.
n Manufactured in Fontana, CA and Tacoma, WA.
Reverse HR-36 (Wall)

Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent
10 characteristic of steel products, not a defect, and therefore is not a cause for panel rejection.