Page 14 - BR100 Product Selection Guide

Nu-Wave Corrugated
®

AN ECONOMICAL ROOF AND WALL SYSTEM

Nu-Wave Corrugated is an exposed fastener metal panel
with ⁄8" deep corrugations. The panel measures 36" out-to-
7
out, with a 32" net coverage for roof applications and a 34 ⁄3" 2 ⁄16"
2
11
net coverage for wall applications. This product is available
factory curved. 7 ⁄8"
32" Roof Coverage
34 ⁄3" Wall Coverage
2
n 32" coverage roof panel.
34 ⁄3" coverage wall panel. Nu-Wave Corrugated
2
n Minimum recommended slope 3:12.
n Gauges: 22ga, 24ga and 26ga in standard finishes and
20ga in ZINCALUME Plus.
®
(Refer to AEP Span Color Charts for full range of color options,
prints, textures, finishes and paint systems).
n Custom manufactured sheet lengths:
6'-0" to 50'-0" (Straight) & 6'-0" to 30'-0" (Curved).
n Available factory curved.
Nu-Wave Corrugated
n Testing: ASTM E1680 (air infiltration) and ASTM E1646 (water infiltration).
n Panel assemblies are Class A Fire Rated when installed on
non-combustible deck or framing per IBC or IRC or when
installed in accordance to UL listings per UL790.
n Manufactured in Fontana, CA and Tacoma, WA.

Curved Nu-Wave Corrugated

Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent
12 characteristic of steel products, not a defect, and therefore is not a cause for panel rejection.