Search
Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

Klip-Rib®

Preferred Panel for Commercial, Educational and Institutional Roofs in all Climates

This slideshow requires JavaScript.

Klip-Rib® is a performance rated structural and architectural standing seam panel system that snaps positively over concealed anchor clips for quick installation and exceptional strength. Klip-Rib is the preferred panel for commercial, educational and institutional roofs in all climates.

  • 16″ coverage roof panel.
  • Minimum recommended slope 1:12.
  • Gauges: 22ga, 24ga and 26ga in standard finishes.
  • Refer to AEP Span Color Charts for full range of color options and paint systems.
  • Custom manufactured panel lengths: 5′-0″ to up to 45′-0″. (Lengths over 45′ available for additional charge).
  • Panels are stiff enough to be shipped without wooden crates. The stretch wrap packaging protects the panels from water and dirt and reduces job site waste.
  • Panel is acceptable for use in wall applications.
  • Crimp curving available for radiused applications.
  • Snap-together seams – Unique clip and lock seam reduces labor by eliminating field seaming.
  • Testing: ASTM E1680 (air infiltration), ASTM E1646 and ASTM E1592 (water infiltration). All testing performed by accredited third-party.
  • Meets UL580 Class 90 wind uplift requirements (Class 60 for 26ga).
  • Roof assemblies Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC or when installed in accordance to UL listings (UL790).
  • Panel evaluated by accredited third party.  All structural performance data is contained within Building Code Approval Report: IAPMO-UES #ER-0309.
  • Weathertight warranty available. Minimum slope required. Contact AEP Span representative for more information. (Roof application ONLY)
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Oil Canning Technical Bulletin (pdf)
  • Manufactured in Tacoma, WA.

Dura Tech™ 5000 and Dura Tech™ mx

Dura Tech™ nt

Design Solution® Premium Colors

ZINCALUME® Plus

Side Seam Warranties