Search
Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

SelectSeam® Wide Batten

Clean Wide Pan Appearance Makes it Ideal for a Classic Architectural Effect

This slideshow requires JavaScript.

A performance-rated, non-structural, batten seam metal roof system. It’s clean wide pan appearance makes it ideal for a classic architectural effect. Curved Select Seam is a performance-rated, non-structural, batten seam metal roof system that can be curved for radius applications.

  • Wide Batten coverage 13 1⁄4″, 17 1⁄4″ and 22 1⁄2″ roof panel.
  • Minimum recommended slope 3:12.
  • Gauges: 22ga and 24ga in standard finishes.
  • Refer to AEP Span Color Charts for full range of color options and paint systems.
  • Custom manufactured panel lengths: 5′-0″ to 45′-0″.
  • Panel is acceptable for use in wall applications.
  • Subtle striations available on 17 1/4″ and 22 1/2″ panels.
  • Can be single or double-sided tapered. (additional lead time applies)
  • Testing: ASTM E1592 (wind uplift), ASTM E283 (air infiltration) and ASTM E331 (water infiltration). All testing performed by accredited third-party.
  • Meets UL580 Class 90 wind uplift requirements. (24ga minimum).
  • Roof assemblies Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC or when installed in accordance to UL listings (UL790).
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Oil Canning Technical Bulletin (pdf)
  • Manufactured in Fontana, CA and Tacoma, WA.

  1. Select Seam Wide Batten – all AutoCAD and PDF details (zip)
  2. Panel Information (dwg) (pdf)
  3. Clip Information (dwg) (pdf)
  4. Eave (dwg) (pdf)
  5. Eave Hem (dwg) (pdf)
  6. Fascia Transition (dwg) (pdf)
  7. Gable – Rake (dwg) (pdf)
  8. Side Wall – Rake Wall (dwg) (pdf)
  9. Ridge/Hip (dwg) (pdf)
  10. Head Wall (dwg) (pdf)
  11. High Eave (dwg) (pdf)
  12. Slope Transition, Hi-Lo (dwg) (pdf)
  13. Valley (dwg) (pdf)
  14. Panel Lap (dwg) (pdf)
  15. Batten Lap (dwg) (pdf)
  16. Roof Penetrations (dwg) (pdf)
  17. Roof Curb – Side Wall Flashing (dwg) (pdf)
  18. Roof Curb – Uphill/Downhill Detail (dwg) (pdf)