Search
Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

SpanSeam™ Metal Roofing

SpanSeam™ metal roofing is a performance-rated architectural standing seam metal roof system. This panel has a mechanically seamed 2” high rib, which provides aesthetic appeal as well as a weather-tight design and used new construction or retrofit applications.

SpanSeam is versatile and used as a metal roof and a vertical metal siding application. Perfect for retail, institutional, industrial, commercial, education, or hospitality projects This panel comes in several energy-efficient colors and paint systems to meet just about any need or look.

  • Application: Roofing
  • Gauge: 24 & 22
  • Coverage: 16"
  • Minimum Slope: 1⁄4:12

Testing and Performance

  • Metal roofing is well-known for its durability by defying the elements.
  • Roof assemblies are Class A Fire Rated when installed on non-combustible deck or framing per IBC, IRC, or when installed in accordance with UL listings (UL790).
  • Meets UL580 Class 90 wind uplift requirements (purlin not to exceed 5′-0″ o.c.).
  • Wind uplift tested in accordance with UL580 and ASTM E1592.  Has been tested for air infiltration per ASTM E1680, and water infiltration per ASTM E1646, and E2140.
  • Meets class 4 Impact (Hail) Resistance rated per UL 2218.
  • All structural performance data is contained within Building Code Approval Report.
  • All testing performed by accredited third-party.

Additional Features

  • Custom manufactured metal roof lengths: 6′-0″ to 45′-0″.
  • Panel is acceptable for use in vertical metal siding applications.
  • Subtle striations standard. (Click here to view an infographic explaining striations) (Flat pan offered by request).
  • Factory applied sealant is standard.
  • Available with 2 pencil ribs.
  • Factory notching available for 16″ panel for turn under at the eave. Notch provides a clean detail and reduction in labor.
  • For end laps, factory swaged panels are available.
  • Field mechanically seamed panel.

Oil Canning Disclaimer

Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Oil Canning Technical Bulletin PDF | RTF.

Product Specific Info

Product Videos