Page 3 - BR100 Product Selection Guide

Design Span hp
®

STRENGTH AND ELEGANCE IN A STANDING ROOF SYSTEM

Design Span hp is a performance-rated structural standing
seam metal roof system which does not require field seaming.
3
Recommended as a roof over metal or wood decking, and as a fascia 1 ⁄4"
or mansard over plywood or supports. 12", 16", 17", & 18" Coverages
Design Span hp
n 12", 16", 17" & 18" net coverages roof panel.
n Minimum recommended slope 2:12.
n Gauges: 22ga and 24ga in standard finishes. 1 ⁄8"
7
(Refer to AEP Span Color Charts for full range of color
options, prints, textures, finishes and paint systems).
1 ⁄8"
7
n Custom manufactured sheet lengths: 6'-0" to 45'-0".
(Lengths over 45' available for additional charge). Optional Wide Batten
n Factory applied sealant is a standard offer. Design Span hp

n Subtle striations available on 16", 17" & 18" panels. with optional Wide Batten
n Testing: ASTM E1592 (wind uplift), ASTM E1680
(air infiltration) and ASTM E1646 (water infiltration).
n Meets UL580-Class 90 wind uplift requirements.
n Panel assemblies are also Class A Fire Rated per
UL790 when installed in accordance to UL listings.
n Panel evaluated by accredited third party.
All structural performance data is contained
within an IBC/IRC 2015 code compliance report.
n Manufactured in Fontana, CA and Tacoma, WA.
Design Span hp

800-733-4955 www.aepspan.com 1