Search
Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

Flush Panel

Available in Both Flat and Vented Panels

This slideshow requires JavaScript.

Flush Panel is a low profile, concealed fastener panel ideal for wall, soffit, fascia, and mechanical screen applications. Available in both flat and vented panels, Flush Panel provides a distinct design for any project.

  • 12″ coverage wall panel.
  • Wall Installation: Horizontal or Vertical (offered in 22ga). Soffit or Fascia Installation: (offered in 24ga minimum).
  • Gauges: 22ga and 24ga in standard finishes.
  • Refer to AEP Span Color Charts for full range of color options and paint systems.
  • Custom manufactured panel lengths: 5′-0″ to 30′-0″ (22ga) 5′-0″ to 25′-0″ (24ga).
  • Factory applied sealant is not available.
  • Available with 1 or 2 pencil ribs.
  • Venting available. Pencil ribs required for vented panel. Venting is 11.23 in2/ft2 open area.
  • ASTM E1592 (wind uplift), ASTM E283* (air infiltration) and ASTM E331* (water infiltration) tested. All testing performed by accredited third-party. * Requires field applied sealant.
  • Wall assemblies rated for fire resistance (UL263) when installed in accordance with UL listings.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Oil Canning Technical Bulletin (pdf)
  • Manufactured in Tacoma, WA.

Dura Tech™ 5000 and Dura Tech™ mx

Dura Tech™ nt

Design Solution® Premium Colors

ZINCALUME® Plus

  1. Flush Panel Horizontal Installation

  2. Flush Panel Vertical Installation