Search
Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

U-Panel

“Utility” Panel Known for its Economical Through-fastened Design

This slideshow requires JavaScript.

U-Panel is a “Utility” panel known for its economical through-fastened design preferred for light commercial and industrial roof or wall applications. U-Panel is especially suitable as an interior partition or liner panel for mini-storages.

  • 36″ coverage roof and wall panel.
  • Minimum recommended slope 1:12.
  • Gauges: 22ga, 24ga, 26ga and 29ga in standard finishes.
  • Refer to AEP Span Color Charts for full range of color options and paint systems.
  • Custom manufactured panel lengths: 6′-0″ to 50′-0″.
  • Perforation options available for an additional charge.
  • Crimp curving available for radiused applications.
  • Purlin-bearing leg speeds installation and improves the quality of panel side laps providing a consistent weather resistant joint.
  • Roof assemblies Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC or when installed in accordance to UL listings (UL790). Wall assemblies rated for fire resistance (UL263) when installed in accordance with UL listings.
  • Panel evaluated by accredited third party. All structural performance data is contained within Building Code Approval Report: IAPMO-UES #ER-0550.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Oil Canning Technical Bulletin (pdf)
  • Manufactured in Fontana, CA.