Search
Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

HR-36®

Through-fastened Metal Panel with 36″ Net Coverage

This slideshow requires JavaScript.

HR-36® Roof & Wall is a through-fastened metal panel with 36″ net coverage. HR-36® Roof & Wall is predominantly used in industrial and commercial applications. As a wall application HR-36 can be used both vertically or horizontally to create design interest.

  • 36″ coverage roof and wall panel.
  • Minimum recommended slope 1:12.
  • Gauges: 22ga, 24ga and 26ga in standard finishes and 20ga available in ZINCALUME® Plus.
  • Refer to AEP Span Color Charts for full range of color options and paint systems.
  • Custom manufactured panel lengths: 6′-0″ to 50′-0″.
  • Perforation options available for an additional charge.
  • Crimp curving available for radiused applications.
  • Matching fiberglass panels available.
  • Testing: ASTM E1680 (air infiltration) and ASTM E1646 (water infiltration). All testing performed by accredited third-party.
  • Roof assemblies Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC or when installed in accordance to UL listings (UL790). Wall assemblies rated for fire resistance (UL263) when installed in accordance with UL listings.
  • Panel evaluated by accredited third party. All structural performance data is contained within Building Code Approval Report: IAPMO-UES #ER-0550.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Oil Canning Technical Bulletin (pdf)
  • Manufactured in Fontana, CA and Tacoma, WA.

Dura Tech™ 5000 and Dura Tech™ mx

Dura Tech™ nt

Design Solution® Premium Colors

ZINCALUME® Plus

ColorGuard xt Warranty