Search
Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

PBR Panel Metal Roof and Metal Wall Panels

This slideshow requires JavaScript.

PBR Metal Roofing and Metal Siding Panel is an ideal solution for pre-engineered metal, post-frame, and agricultural buildings. This panel is recommended for light commercial and industrial projects as well as consumer-based Do-It-Yourself (DIY) applications. Galvanized G90 PBR panels are used in buildings for livestock and animal confinement as well.

With this long-lasting, durable, and sustainable metal panel, you’ll also find it comes in several energy-efficient colors and paint systems.  PBR also offers a unique yet flexible design when combined with other building materials.

Roof assemblies are Class A Fire Rated when installed on non-combustible deck or framing per IBC, IRC, or when installed in accordance with UL listings (UL790). Wall assemblies are rated for fire resistance (UL263) when installed in accordance with UL listings.

Choose PBR for your next project to protect your investment for decades to come.

  • 36″ coverage metal roof and wall panel.
  • Minimum recommended slope 1:12.
  • Gauges: 26ga in standard finishes.
  • Refer to the PBR product sheet for full range of color options and paint systems.
  • Custom manufactured panel lengths: 5′-0″ to 40′-0″.
  • Matching polycarbonate panels available.
  • Purlin-bearing leg speeds installation and improves the quality of panel side laps providing a consistent weather resistant joint.
  • Roof assemblies Class A Fire Rated when installed on non-combustible deck or framing per IBC or IRC or when installed in accordance to UL listings (UL790). Wall assemblies rated for fire resistance (UL263) when installed in accordance with UL listings.
  • Panel evaluated by accredited third party. All structural performance data is contained within Building Code Approval Report: IAPMO-UES #ER-0550.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Oil Canning Technical Bulletin (pdf)
  • Manufactured in Sacramento, CA and Spokane, WA.