Search
Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

Select SeamĀ® Shingle Cladding

Select SeamĀ® Shingle Cladding product offering takes a traditional standing seam profile and turns it into a staggered shingle-like vertical cladding, adding depth and beauty only metal siding can deliver.

  • Application: Siding
  • Gauge:Ā 22
  • Coverage: 12ā€³& 16ā€³

Testing and Performance

  • Metal siding is well-known for its durability by defying the elements.
  • Testing: ASTM E1592 (wind uplift), ASTM E283 (air infiltration) and ASTM E331 (water infiltration).
  • All structural performance data is contained withinĀ Building Code Approval Report.
  • All testing performed by accredited third-party.

Additional Features

  • Manufacturerā€™s suggested maximum length is 8ā€™ in order to maintain a shingled appearance. Longer lengths available. Contact an AEP Span Representative for more information.
  • Standard with Narrow Batten cap.
  • Vertical installation only on a solid substrate.
  • Factory applied sealant is standard except for battens less than 5ft. Battens less than 5ft require field applied sealant.
  • Flat pan offered as standard. (Subtle striations offered by request).
  • Factory notching available for turn under at the eave (some limitations apply). Notch provides a clean detail and reduction in labor.
  • Snap-together panel, no field seaming required.

Oil Canning Disclaimer

Oil Canning: All flat metal surfaces can display waviness commonly referred to as ā€œoil canningā€. ā€œOil canningā€ is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection.Ā Oil Canning Technical BulletinĀ PDFĀ |Ā RTF.

Product Specific Info

Product Videos

Select SeamĀ® Shingle Cladding by AEP Span is a performance-rated architectural standing seam metal roof system, perfect for your next project.