Generic filters
Exact matches only
Search in title
Search in content
Filter by Custom Post Type

Prestige Series® Metal Wall Panels

This slideshow requires JavaScript.

Prestige Series® Metal Wall Panels consist of five concealed fastened metal wall panels. These panels can be used for exterior and interior walls, fascias, equipment screens, soffit, and as a ceiling panel application and provide a clean, distinctive design for civic, retail, commercial, institutional, and mixed-use.

This long-lasting, durable, and sustainable metal panel also comes in several energy-efficient colors and paint systems. Prestige Series offers architects and building owners a unique yet flexible design when combined with other building materials.

Wall assemblies are rated for fire resistance (UL263) when installed in accordance with UL listings. Choose the Prestige Series for your next project to protect your investment for decades to come.
  • 12″ coverage metal wall panel.
  • Wall Installation: Horizontal or Vertical offered in 22ga minimum. Soffit or Fascia Installation: Offered in 24ga minimum, except 6″ reveal.
  • Gauges: 22ga and 24ga in standard finishes.
  • Refer to AEP Span Color Charts for full range of color options and paint systems.
  • Custom manufactured panel lengths: 6′-0″ to 40′-0″ (25′-0″ maximum length for 24ga panels).
  • Offered in 4 different reveals: 0″, 1″, 2″, and 6″.
  • Factory applied sealant is a standard offer.
  • Available with 1 or 2 pencil ribs. 12″ panel available with wave pattern.
  • Perforation options available for an additional charge.
  • High performance clip available to meet wind loads.
  • Testing: ASTM E1592 (wind uplift), ASTM E283 (air infiltration) and ASTM E331 (water infiltration). All testing performed by accredited third-party.
  • Wall assemblies rated for fire resistance (UL263) when installed in accordance with UL listings.
  • Panel evaluated by accredited third party.  All structural performance data is contained within Building Code Approval Report: IAPMO-UES #ER-0309.
  • Oil Canning: All flat metal surfaces can display waviness commonly referred to as “oil canning”. “Oil canning” is an inherent characteristic of steel products, not a defect, and therefore is not a cause for panel rejection. Oil Canning Technical Bulletin (pdf)
  • Manufactured in Fontana, CA and Tacoma, WA.

Dura Tech™ 5000 and Dura Tech™ mx

Dura Tech™ nt

Design Solution® Premium Colors


  1. Prestige Series Horizontal Installation

  2. Prestige Series Vertical Installation